Before installing a fireplace, it is important to know what it is and exactly what it is usedYou should know that such a structure is used to evacuate the smoke when burning wood in the houseThe smoke comes out of the vertical pipe that is installed in the buildingIt should be noted that there are different definitions of fire, but what interests us here is the mechanism
Features a fireplace
The main factor to be taken into account when installing a fireplace that there is space in the houseIt is very important to measure in advance the size of the piece that will host structureIt was after this that it will be possible to define the shape and size of the fireplace to be installed
In general, the installation of the chimney is in the right corner of the room of the buildingBeyond that, there are other criteria to be considered as ground conditionsThis is a very important step, because you need to know if the soil is able to support the structure
Also be aware that there are two types of selection of materials for the construction of a chimneyThe homeowners can opt for:
- The metal chimney that has the distinction of being highly resistant to high temperatures- The masonry chimney in bushels of clayIn terms of its coating, it is possible to choose between the bricks or stones
The steps to install a fireplace
The first step when installing such a structure is to choose the corner where it will be installedThe latter can be determined based on the model chosenWhat you should do is to measure the model chosen, and to chart the extent of the walls to see if the installation is possible or not in the chosen locationBesides size, there are also two very important criteria should not be overlooked before installationThese characteristics include the flow of air and smoke evacuation
The next steps involve installing the components, including foundation stones and the elements of homeRegarding the latter, it is advisable to begin the installation of the plate home, through the installation of the legs to finish with the back of the homeWe must then make small holes along the vertical wallThe issue then laying coats that can be stone or girder
The final steps involve finishing and assembly of the strainThe first signs above the winding of the hood around the pipe and applying a coat of paint or plasterWhat remains to do is mounting the strain that will allow for better ventilation and facilitate the evacuation of smoke |
