The choice of water heater
As with any purchase, it is important to find one that best meets their needs. Verification of the average capacity of the device is also something that can guide your choiceIt is thus necessary to consider the amount of hot water you need daily. This includes the amount of water you need to:
- Baths
- showers
- the dishes
The type of your home is also one of the basic criteria of your choice. The question is whether you have a studio, an apartment or a house.
Among the various models on the market, vertical water heaters are interesting. They are both suitable for a wall bracket and a base.
The heater resistance steatite is also effective because they do not need to be emptied if elementary concern. They do not scale deposits.
What a location for this equipment?
The best practice is to place the unit near the main point of use hot water. This means that you should not remove him from the bathroom, for example. Later, when you make more savings.
Also avoid exposing the cumulus gel and make sure it is in one place to make access easier for simpler settingsIn this case, a clear area of 50 cm is required.
NF C 15-100 must be taken into account if it is a location in a bathroomIt is suggested that the unit must be 60 cm from the bath at least.
For proper location of a water heater, be sure to consider distance, point of use hot water and the unit. Note that a space is always required especially for that of the bathroom. All this is in order to ensure the safety.
How to ask a water heater?
The first step to follow is to take the template and to have at the wall. After having checked the free space, you can perform marking holes. To further secure the device to the wall, it is advisable to use anchors and screws.
The next step is the positioning of the heaterIt's hanging legs of the latter between the wall and the nutIt is then important to seal the nuts. A spirit level will be helpful to take the attachment points of the ball.
Thereafter, you can use an awl to lag. This must be done taking into account this type of material and size required. We must now secure it using screws and a wrench. The ball can be hung.
When this is done, the implementation of the fitting insulation from pipes of hot and cold water is necessary. This allows a high isolation.
The last step is to set the tip of the plastic hose to the flange of the sleeve. |
