Techniques for successful assembly
To build its convenient, think about how to raise the front of the cabinet. This is a discussion focused on the dimensions of the furniture. Do not wait for the various component parts thereof are gathered to engage in this study.
When done, the assembly of the four sides of a drawer with those of the ends of the longer pieces is the next step. Discover the most suitable size drawers for more harmony and beauty is the next step.
Successful assembly of your dresser is easier if you opt for wood already cut. Thus, it will not be useful to conduct yourself as well as cutting operations relating to the making of the dimensions of these pieces of woodIf you have not found pieces of wood already cut, ready to perform cutting by using a circular saw. Subsequently made two lugs 2cmx1cm on the ends of each crossIt must, thereafter, to ensure to get 2cm x 1cm mortises at the meeting point of like cross.
Once all this is done, it'll just gather and tie the legs. Just for that, cover the walls of mortises adhesive designed for wood. A clamp allows you to have a very firm fitting.
How to make the box?
Construction of the top panels, side panels and brackets.
This involves installing the side panels as well as from above, and cleats. Your tools will work the screws and the drillIn this case, gather all, the three strips on top of each side panels. Respecting the 23 cm spacing between the ties before, you can set up. The cleats may well be the runners of the drawers.
After all this, do not forget to tighten the screws in the side panels on the inside of side rails
Finally, the top boards will be placed on the top rail with overhangs of 2 cm on the sides and front of the building. Ten holes that can reach the top rail on this board are required to obtain the box. Of trouillons will thus be used to properly fix and collect.
Tips for the success of its convenient
The last phase of the implementation of a commode is finishing. The success of your furniture will largely depend. The work to be done in this phase are set out and tighten the different pieces of furniture. This is particularly true of the boards on the side of the drawers, the bottom thereof, and the side guides C profiles on each side of these.
Note that the arrangement of drawers depends on the creativity and inspiration of each. Consider, however, the durability of the furniture and aesthetics. Do not forget to do the sanding of the chest for the final touch. |
