Installation of a molding
This step is optional, and various types of materials used to achieve it well, but the wood is the most recommended. For this, the operation requires a prior measure the precise distance to be covered, including that of the walls where the molding will be installed. Otherwise, there must be a plane of the door on which this accent will be placed. We must also remember to buy fuel wood to make the installation. Pine fiber is a good choice.
Regulations for the construction of constraints do not refer to the installation of the molding. Many people could realize this step or burn their choice.
The moldings are items that are available on the market. They are available per meter by traders with knowledge in this area. According to his choice or availability, the owner can choose between wood composite and non composite wood.
Mounting the frame
The installation of a door frame is done in many stages. Indeed, we must first explain it in his paper and mark available gonsIt is possible in this stage to consider the installation of the latch lock and perform the installation after installing it.
In order to maintain at all during the assembly of the frame, there should be extra long to place a cross-keeping all. Prior to final drying, check the squareness of everything and then leave to dry. During these steps just mentioned, the elements that are still on the ground to mount a blankIn the next step, you must paste the crosses on the amounts, the blades and the bearing surface of the miter.
If it is a frame window must be highlighted with everything with nails or with screwsBut for some more toughness, the use of screws is recommended.
The installation of the door frame
The installation of the door frame requires the use of the following:
- Wood screws with 2 to 3 inches
- Nails with 1 to 2 inches
- Cales shingle
- Screwdriver
- Box tab
- Hunting nail
- Hammer
- Drill
After positioning the frame, it must make its determination. To do so, following the recutting of the extra length, you have to put wood shims in the spaces provided for screwing it to the wallIf there are hollow places between it and the door, we have to apply the coating or the polyurethane foam. |
