What types of faucets to choose?
There are various types of valves for the shower and / or tub on the marketIn general, their difference can be detected by a pellet or any bookmark. Often, the handles are distinguished by their color: one colored blue on the left to indicate cold water and another to the right to hot water. Equipment of this type is called mixerThis facility is especially popular in areas with harsh winters.
Some types of valves have a valve head that is used for opening and closing with a joint. It is advisable to change each year to prevent leaks. But compared to those hard-headed, these facilities are less resistant and wear can be achieved in a short period of use. This reflects the fact that their opening is made in just one turn up. But the disadvantage lies in the fact that there is no possibility to repair the disk if a leakIt is then necessary to buy another.
Faucets mixers are also available on the market. By using only one command sets both the rate that the temperature of the water. Some of them have a ring scald with the objective of limiting the opening of hot water while ensuring the limitation of energy consumption.
The models are the most innovative ones thermostatic mixing valves and mixers infrared.
Prerequisites for the installation of this equipment
Here are some steps to take before installing a faucet wall:
- Cutting the water via a tap-off or other means
- opening it to the pressure drop in pipes and closed after it is no flow of water
- Capping of the shower or sink to that there is no rejection of such one in the pipeline
- taking steps to make the installation of pipes including measures of seals and those of the two water inlets
The stage of the installation
The right time to install a faucet wall is the renovation of the room where he must be such as bathroom, kitchen, etc. Sealing two pipes are required for its assembly, the first for hot water and one for cold water. Each of these pipes is used at the end of a pipe and is pushed to the wallIt was after that there will be the installation of this equipment which is adapted so that is the same regardless of the location of the installation.
For the installation is horizontal, it must conduct a small test with a spirit level. |
