Paint the iron and its importance
To increase the life of the iron in the home, it must be protected from rust, which is the primary source of damage such as swelling or cracking. The painting of this material is preceded including the cleaning of it. Cleaning is an important step and depending on the state of it, use appropriate materials.
Pickling is the first process to be followed if the material is colorful and for this it is possible to use an abrasive paper if the iron is in good condition. Use a rust remover chemical is necessary if he is suffering from rustIt must be completely removed prior to painting because it does not allow optimal protection.
For maximum protection, you should use the minium, an undercoat that insulates the metal from the ambient air and its moisture and therefore does not allow rust to settle. In general, miniums have an orange, gray, white or colorless. And nature of this product, there are currently that are also inhibitors for the effect of color and optimum protectionMoreover, you should use natural lacquer paints instead of that dull matte metallic luster. With the first, the result will be brighter with a fine color and fluid.
The types of paint suited to this material
There are paintings of aerosol type but in general, the choice must be made according to the use of ferrous material. There are specially adapted to be used on high-temperature iron and old metal radiators, components of the heaters or the fireplace plates. There are others such as alkyd rust for use directly on the material and increased protection against rust and highlights the shiny metal surfaces. These products must be able to extend their life by protecting them from attacks
For those of ferrous objects outdoors, you must opt for special types. These will provide the construction ferric a maximum lifetime by effectively protecting against rust is one of the greatest evils that can strike the metal. To do this, there is a step in a nine iron material. This is to make the degreasing using acetone-based cleaner. The thin film of grease does not allow the paint to adhere. After completing work on the application of the latter, it should be cleaning tools that were used and for this there is the white spirit. |
